Introduction to Turning A
Description: In this class, students will learn:
- The safety and basics of turning
- Lathe components and turning tools
- Tool sharpening and use
- How to perform the basic cuts on spindles: V-groove, coves and beads
The class concludes with the student making a tool handle, including the application of a ferrule and a finish. This class will help prepare you to get the certification necessary to use the shop lathes.
Level: Beginner
Prerequisites: Age >18
Format: 2 sessions, 5 hours each
Project you will make: Honey dipper
Cost: $185 and SDFWA membership.
CLASS TIME/DATE
Sunday, April 14: 12:00 – 5:00 pm AND
Sunday, April 21: 1:00 – 4:00 pm
Friday, June 7: 4:00 – 9:00 pm AND
Sunday, June 9: 1:00 – 4:00 pm
Add your name to the Interest list for this class. Review Interest list policy here.
Special Instructions for this class: Review the following videos before class.
Full refunds for cancelations more than 14 days in advance or if class is cancelled; 50% refunds for cancelations more than 7 days in advance; No refunds for cancelations less than 7 days in advance or for failure to appear.
Introduction to Turning B
Description: In this class the student will learn:
- Lathe and tool safety
- Tool sharpening
- Bowl gouge use and introduction of the four basic cuts:
- Push cuts, pull cuts, scraping cuts, and the shear scrape
- How to make a dovetail tenon to fit a four jaw chuck
- Using a lathe-mounted drill chuck.
Level: Beginner
Prerequisites: Age >18; Turning A and Shop Spindle Certification;
Format: 1 session, 5 hours
Project you will make: Weed vase and Jam Chuck
Cost: $150 and SDFWA Membership
Class Time/Date
Sunday, May 19: 8:00 am – 1:00 pm
Add your name to the Interest list for this class. Review Interest list policy here.
Special Instructions for this class: None
Full refunds for cancelations more than 14 days in advance or if class is cancelled; 50% refunds for cancelations more than 7 days in advance; No refunds for cancelations less than 7 days in advance or for failure to appear.
Bowl Turning
Description: Turning wood bowls is a wonderfully creative experience. In this class you will make two bowls from start to finish, with an emphasis on safe turning practices.
Level: Intermediate
Prerequisites: Age > 18; Introduction to Turning B and Lathe Spindle Certification; or instructor Consent.
Format: 2 sessions, each 4 hours
Project you will make: 2 bowls
Cost: $250 and SDFWA membership2
Class Time/Date
Add your name to the Interest list for this class. Review Interest list policy here
Special Instructions for this class: None
Full refunds for cancelations more than 14 days in advance or if class is cancelled; 50% refunds for cancelations more than 7 days in advance; No refunds for cancelations less than 7 days in advance or for failure to appear.