Tool Lead – Tom Caughlan
Grizzly Edge Sander – G0512
Jet JSG-6DC 12″ Disk & Belt Sander, 1.5 HP
SuperMax 25-50 Drum Sander
Features
- Table size: 24″ x 42-1/4″
- Table height: 33″–39″
- Overall size: 52-1/2″ long x 24″ wide x 48-3/4″ high (with handle up)
- Platen size: 6-1/4″ x 31-1/2″, graphite coated
- Sanding belt size: 6″ x 80″
- Belt speed: 1800 FPM
- Paddle safety switch
- Direct drive power
- Shielded and permanently lubricated ball bearings
- Welded-steel powder-coated base
- Extended sanding surface
Generously Donated by Dick Rosenberg
- Two precision-ground cast iron tables have positive stops at 90° and 45° for sanding flat pieces or mitered angles; allows belt sander to be used vertically, horizontally or anywhere in-between
- Dual thumbscrew belt tracking adjustment locks to keep belt on track during use
- Graphite covered steel platen runs cooler increasing machine and belt life
- Belt guard allows full use of the 6″ belt width and length
- Drive drum is rubber-coated for a better grip on the sanding belt resulting in less slippage
Features
- Maximum Width 50” (2 passes)
- Minimum Length 2-1/4”
- Maximum Thickness 4”
- Minimum Thickness 1/32”
- Drum diameter 5” diameter – 1740 rpm.
- Height Adjustment 1/16” per revolution (depth scale included)
- Conveyor Motor Direct drive D.C. motor; Infinitely variable 0 – 10 ft/min
- Drive Motor (TEFC) 1-3/4 HP – Continuous-duty
- Power Requirements 110 V, 1 Ph, 20 A
Safety Video
Intro to Drum Sander – Tom Caughlan
